Hefei Jingpu Sensor Technology Co., Ltd. is one of the leading manufacturers and suppliers of disposable medical temperature probe for baby warmer in China, featured by quality products and low price. If you're going to buy discount disposable medical temperature probe for baby warmer made in China, welcome to get quotation from our factory. We also accept customized orders.
Disposable Medical Temperature Probe for Baby Warmer
Product Description:
2.252Kohm Disposable Medical Temperature Sensor is a kind of NTC temperature sensor, which is widely used for skin temperature monitoring of medical use. Its probe is made of epoxy resin and metal disk. The resistance value is R25℃=2.252kΩ. Its total length is 1.5 meters. The temperature tolerance is ±0.1℃.
Features：
The features of the 2.252Kohm Disposable Medical Temperature Sensor are as follows
-R25℃=2.252kΩ
-B25/50=3935k
-Operating temperature range: 0℃~50℃
-Accuracy:(25~45)℃±0.1℃
Application:
The Disposable 2.252Kohm Medical Temperature Sensor is generally applied for the spare part of medical motors.
Structure and Dimension:
3 Directions For The Application Of Temperature Sensors in New Energy Vehicles
Throughout the entire operation process of new energy vehicles, temperature monitoring is the last barrier to safety early warning. Effective and timely thermal management strategies may become the focus and key to improving the safety of electric vehicles, and high-performance temperature measurement components are the key to realizing all safety. the foundation of the strategy.
Application and requirements of temperature sensors in new energy electric vehicles, temperature monitoring in electric vehicles mainly covers the following three directions:
a. Electric drive controller, motor and power magnetics
With the application of a new generation of switching devices, the faster switching frequency makes the power density of the power supply continue to increase. While the size of the equipment is reduced, more precise requirements are placed on the heat dissipation design, which also makes the temperature monitoring capability of the equipment in operation. Go up one step. The overheating operation of the motor and power magnetic components also needs to be fed back to the control terminal in a timely and accurate manner. Such overheating often means that mechanical and circuit failures have occurred, or excessive loads have been experienced. Either situation will cause permanent damage to the motor. .
b. Power control and charging gun in charging equipment
During the long-term use of the charging device and the charging gun, there will be a risk of poor contact due to the drag of the wire or the wear of the charging gun head, which will cause the internal resistance in the line to rise, and the heat will increase when the current is passed. resulting in safety hazards.
c. Power battery BMS
BMS is the link between the battery and the whole vehicle. In extreme cases, thermal runaway caused by battery overcharge may cause serious consequences of battery rupture or even explosion. At the same time, thermal management not only affects battery safety, but stable and accurate thermal management capabilities can maintain high discharge efficiency of power batteries. Therefore, the quality of temperature information on the battery not only determines the upper limit of work efficiency, but also the bottom line of safety guarantee.
No matter in any of the above scenarios, strict performance indicators are put forward for the temperature sensor: high reliability for ten years, high measurement accuracy, and extremely low drift.
CONTACT FOR BEST QUOTE:
Email: sales06@jingpusensor.com
WeChat:19965457980
Hot Tags: Disposable Medical Temperature Probe for Baby Warmer, China, suppliers, manufacturers, factory, customized, wholesale, price, cheap, Russian, free sample, made in China, healthcare temperature sensor, community health center temperature sensor, non invasive temperature sensor, ambulatory care temperature sensor, compact temperature sensor, miniature temperature sensor
