+86-551-68661901
video

NTC Temp Sensor For A/C


Comply for RoHS standard
PVC insulated lead wires temperature sensor, measuring temperature range: -20℃~105℃ (-22°F to +221°F)
Waterproof Aluminum/Copper shell

Description

Hefei Jingpu Sensor Technology Co., Ltd. is one of the leading manufacturers and suppliers of ntc temp sensor for a/c in China, featured by quality products and low price. If you're going to buy discount ntc temp sensor for a/c made in China, welcome to get quotation from our factory. We also accept customized orders.

 

Brief Instruction: 

The NTC Temp Sensor For Air Conditioning is mainly used in the air conditioner evaporator. Air conditioning temperature sensor mainly consists of several parts: insulation wire (PVC wire, cross-linked polyethylene insulation wire), NTC chip and epoxy resin, aluminum shell. Resistance values range from 0.3kΩ to 2000kΩ, beta values range from 2500K to 4500K.


Features:

Comply for ROHS(Restriction of Hazardous Substances) standard, it's a mandatory standard set by European Union legislation

PVC insulated lead wires temperature sensor,  measuring temperature range: -20℃~105℃ (-22°F to +221°F)

Waterproof Aluminum/Copper shell

 

Widely Application:

A/C Air conditioning Evaporator

For Household Appliances: Air conditioner, referigerator, freezer, water heater, air heater, dishwasher, etc.

For Car: Automobile air conditioner, water temperature sensor, intake air temperature sensor, engine.

Temperature Control System: Greehouse, acquarium, etc.


Structure and Dimensions:

 

 Structure

  

Electrical specification:


Electrical specification


Product picture: 

 

  NTC Temp Sensor For Air Conditioning

 Mode of Carriage:

Carriage

The difference between the thermocouple and the thermal resistance

1. Although both are contact thermometers, thermocouple and thermal resistance have different temperature ranges. Thermocouple used in high temperature environment, because they are in the low temperature zone thermoelectric potential output is small (we can have a look at the table), when the electric potential, the measures against interference and the second table and requirement is high, otherwise the measurement, and, in the region of the low temperature, the change of the cold end temperature and the relative error caused by the change of environmental temperature is very outstanding, is not easy to get full compensation. At this time in low and medium temperature, the general use of thermal resistance temperature range is 200-500, and even lower temperature can be measured (such as carbon resistance can be measured to the low temperature of about 1K). Now the normal use of platinum thermal resistance Pt100,(there are also Pt50, 100 and 50 represents the resistance value of thermal resistance at 0 degrees, in the old scale with BA1, BA2 to represent, BA1 at 0 degrees resistance value of 46 ohms, in the industry also useful copper resistance, the scale is CU50 and CU100, Between a 50- 150 in some special occasions and steel resistance, manganese resistance, etc.). Therefore, in the general temperature environment, the performance advantage of thermal resistance is more obvious, and the use method is also more simple.

2. According to the principle of thermocouple temperature measurement, only when the temperature of its cold end is constant, the measured temperature is a single value function with the thermoelectric potential. In practice, a cheap connection wire (also called compensation wire) with similar thermoelectric characteristics to the corresponding thermocouple is used to extend the cold end of the thermocouple to a relatively constant temperature (preferably 0 degrees). For example, copper and copper are used as compensation wire to extend nickel-silicon thermal resistance. Therefore, the thermocouple to the two table extension wire is two. The thermal resistance and the secondary meter are connected by copper wires. In order to reduce the measurement error caused by environmental changes, the three-wire connection method is generally adopted, in which two wires connect the thermal resistance in series on two adjacent bridge arms, and the other wire is the source of power. When used, the sum of the resistance value of each wire and the adjustment resistance should be guaranteed to be 5 ohms (+0.01).


Hot Tags: NTC Temp Sensor For A/C, China, suppliers, manufacturers, factory, customized, wholesale, price, cheap, Russian, free sample, made in China, Temp Sensor For HEV, Versatile Temperature Sensor, DS18B20 Temperature Sensor, Freezer Temperature Sensor, Temperature Sensor for Boiler, Car Motor Temperature Sensor

Contact Supplier